How to deal with carbon fiber cloth reinforcement materials?

1. All entry materials, including carbon fiber materials and cementing materials, must meet quality standards, have factory product qualification certificates, and meet engineering reinforcement design requirements.　　

2. In order to prevent carbon fiber from being damaged, it is strictly forbidden to bend the carbon fiber sheet during the transportation, storage, cutting and pasting process.　　

3. The construction quality of each process is guided and supervised by a technician. After each process is completed, the technician can be checked and approved before the next process can be carried out.　　

4. The carbon fiber dipping glue should be applied evenly without missing application. The dipping glue should be used up within the specified time.　　

5. The quality inspection standard of carbon fiber paste　　

a. The undercoat and topcoat are well impregnated into the carbon fiber bundles.　　

b. The carbon fiber is tightly bonded.　　

c. The lap length along the fiber direction is not less than 500px, the lap parts between the layers must not be on the same straight line, and the layers must be staggered at least 1250px.　　

6. Carbon fiber material specifications, pasting position, length, width, fiber direction, and number of layers comply with national standards.